LINKY Low Frequency CPL Filter

Today, in addition to the already existing electromagnetic pollution (50 Hz, hyperfrequencies), there is new pollution from Power Line Communication (PLC) generated by the communication system of so-called "smart" meters such as Linky.

These PLCs with frequencies between 35 kHz and 91 kHz are superimposed on the 230 V – 50 Hz current. These new frequencies are 1000 times higher than the frequency of domestic current

The PROSTOP65 filter from POLIER is a wideband CPL filter that can attenuate by 40 dB any CPL current from the different CENELEC bands (CENELEC A Linky, B, C and D) but also all CPL from domestic equipment (home automation, alarm, security system).

Facility :

Installation of the PROSTOP65 filter requires manual skills for assembly and knowledge of electricity.

First of all, make sure you have the skills, qualifications and equipment necessary to carry out the assembly safely.

For your safety, the electrical installation to which the PROSTOP65 filter(s) will be connected must comply with the electrical standard in force in your country. It is recommended to call upon a professional electrician to carry out the assembly in compliance with professional rules and the electrical standard NF C15-100 (for France).

If you are unable to perform the installation safely, contact an electrician.

Attenuation:

Attenuation: -40 dB (99% in Voltage)
Impedance: 2 Ohm
Fc=52 Khz -58 dB
Fc=80 Khz -44 dB
Fc=128 Khz -57 dB

Test carried out by David BRUNO, author of the book “how to protect yourself from electromagnetic pollution”.

Technical information: 

• Filters the 4 CENELEC Frequency bands (A Linky, B, C and D)
• Attenuation: -40 dB (99% in Voltage)
• Installed on the private part of your installation, it is legal
• Reduced footprint (4 modules)
• Suitable for single-phase and three-phase installations (one filter per phase)
• Attenuation: 40 dB (99% in Voltage)
• Filtered frequencies: 35 – 150 kHz (CENELEC A Linky, B, C and D)
• Maximum intensity: 65 A
• Certification – CENELEC Standards: CE – EN 50065-1
• Operating voltage: 110 -270 V
• Operating frequency 50 – 60 Hz
• Protection index: IP51
• Lifespan: 25 years
• Operating temperature: -25 / +100 °C
• Max section phase/neutral connection: 6 – 16 mm²
• Tightening torque 3 +-0.1 Nm
• Weight 0.8 kg
• Origin: France

Standards / Certifications:

The PROSTOP65 filter has been certified by the ENAC/ECA certification body and meets the following standards:

• EN-50065-1 ; EN-60939-2
• IEC-60950-1; IEC-62052-31; IEC-60950-1
• 2004/108/EC; 2011/65/EU
• UNE-20324; UNE-EN-50102; UNE-EN-61709
• UL-1283
• ROHS